Dexter Disc Brake Kit 3.5K 10" Vented Integral Rotor Tiedown# 82113 (46304 Caliper)

9.6" Vented Rotor (Assists in faster cooling): With GalvX Finish " Integral pregreased with bearings (0.75")

Distinctive 380 aluminum caliper (46304A) with E-coat finish. Automotive quality ceramic brake pads. Dual Brass bleeder valves. Stainless steel piston cup. Aluminum caliper with raised ribs dissipates heat up to 5 times faster than normal cast iron calipers.

Galvanized heavy duty mounting flange and hardware included.

Inner bearing - #L68149 (1-3/8"), Outer bearing - #L44649 (1-1/16")

1/2" wheel nuts, Grease seal, Grease cap with rubber plug

All pre-greased at the factory

One Wheel Assembly per box, Two Kits reguired per axle.
Universal (left or right)

Dexter Part # 82113, Tie Down Disc Brake - Single Wheel Set - Integral Hub and Rotor - GalvX Finish - 3,500 lbs

Venture Part# 20305  Load Rite# 4265.07

1. All Aluminum Caliper: 380 series Aluminum w/E-Coat, sheds heat five times faster than cast iron
2. Brake Pads: Floating pads with GalvX steel backing plates further reduce areas susceptible to corrosion.
3. Vented Rotor (Assists in faster cooling): With GalvX Finish 9.6" Integral (0.75")
4. Slim Design: Allows short axle overhangs and provides direct brake line routing to the axle
5. Bi-metal Pistion: Combines a stainless steel outer pistion with an aluminum inner sleeve to shed braking heat fast. The stinless steel outer piston will not rust or corrode.
6. Oversize Rubber Boot: 50 percent thicker by design to provide a positive faster piston witdrawal.
7. Stainless Steel Caliper Pins with Oil Impregnated Broonze Bushings: Allows caliper to float freely and ensures proper alignment during installation and will not rust or corrode.
8. Vented Caliper Housing: Improves heat disspation and decreases pad wear.
9. One Piece Brass Bleeder Valve with Teflon Coating: Will not corrode and allows for easier bleeding of brake system.
10. Square O-ring with Slant Angle: Helps retract pistons away from the rotor when fluid pressure is released. Provides better protection from contamination of brake fluid.

Hardware kit contains SKUs:17093A(x1), 12114(x2), 02295(x5), 6971 (x4), 71620Z(x4)